news from Armada

Armada marine hydraulics' latest news

 

Geberit Pipework at the new Mitchell & Webber fuel depot in Tiverton, Devon.

Mitchell & Webber's New Fuel Depot up and running in 3 days with Geberit.

02/12/2013

Significant cost advantages from using Non Welded Pipework systems.

Day one saw the three large tanks and the pumping skid craned into position on to the already prepared concrete slab.
Day two and Armada attended the site to support the Mitchell & Webber team with the installation of the Geberit Mapress pipe and fittings, having previously being trained and certified by Sarah Young from Geberit. During this time the electrical and infrastructure components were also being installed.
Day three involved finalisation of all the pipe-work, fittings and the electrical installation followed by the system being commissioned.

So unbelievably in three days the Mitchell & Webber engineering team had the site operational.

The main factor in the rapid commissioning of the plant was undoubtedly the use of the Geberit non-welded pipe-work system against traditional welded flanges and fittings. In conjunction with Trevor Rigden of Armada’s commercial team, Mitchell & Webber’s project management team planned the installation around Geberit 108mm and 76.1mm 316 stainless tube and Geberit Mapress fittings. Whilst the base cost of the materials were higher than that of standard scheduled tube in mild steel the other cost benefits were considerable. Time and ease of the installation being the main cost saving and benefit, as previously installations took from two to three weeks. Mitchell & Webber’s engineering project team began on Thursday morning and by lunchtime on Saturday the large fuel system of tanks, transfer arms and associated power sources, pumps, valves and pipe-work had been commissioned.

Trevor Rigden comments “The Geberit Mapress system is so quick and easy to install”. The pipe-work runs were installed on site with no welding required. The Geberit Mapress system is very flexible; the joints do not have to be pressed until the system is in place, so any adjustments to the pipe-work can be easily under-taken. As for future maintenance, the use of the 316 Stainless steel components means there is minimal risk of corrosion and no painting required. The Mitchell & Webber team can easily extend the system through the use of slip joints and a wide range of flanged and threaded fittings.

Armada Engineering is proud to associate itself with this innovative and cost saving non-welded pipe-work system. Geberit Mapress is a system Armada has supplied for both marine and industrial purposes; with Teekay Couplings, Victaulic’s groove system and WalformPlus for high pressure applications, Armada are market leaders in cost effective pipe-work systems.

Please ask our sales team for further information.

Read full story
One Stop Shop for the South-West

Armada Supplies Plymouth One-Stop Shop for the South- West.

01/11/2013

Armada expands its Fastener Division product and services to include Fluid Power.

Armada expands its Fastener Division product and services to include Fluid Power.

Read full story
Ask Armada for a free ticket to Sewaworks 2013.

Seaworks 2013 June 25th – 27th Stand C105.

14/05/2013

Seaworks 2013 June 25th – 27th Stand C105.

Armada are at Seaworks again after a successful 2012 show. This year bringing DVZ, Eaton Walterschied and Teekay with them on their stand.

Read full story
M5 in sail before its extensive re-fit at pendennis Shipyard, Falmouth.

Teekay Couplings are Preferred Choice on M5

13/05/2013

Teekay Couplings are Preferred Choice on M5

Armada Marine win contract to supply Teekay Couplings on M5 at Pendennis Shipyard.

Read full story
Armada's Test Rig Mimics the Tide.

Marine Renewables - On-site Equipment and Services

12/05/2013

Marine Renewables - On-site Equipment and Services

Armada is looking to the future and predicting the need for on-site equipment for testing of devices as well as pressure testing and flushing.

Read full story
Artist Design of 120m Megayacht

Armada wins 120m Luxury Megayacht Project in Greece.

11/05/2013

Armada wins 120m Luxury Megayacht Project in Greece.

Armada Marine Hydraulics win contract to provide technical support to a 120m new build in Greece.

Read full story
Clean and Functional Installations

Armada Marine Hydraulics support A&P Falmouth.

25/03/2013

The close relationship between A&P Falmouth and Armada Marine Hydraulics was exemplified through both companies having prominent articles in this springs edition of Shipping & Marine magazine.

The close relationship between A&P Falmouth and Armada Marine Hydraulics was exemplified through both companies having prominent articles in this springs edition of Shipping & Marine magazine.

Read full story
Stand D81

All Energy Exhibition Aberdeen 22/23 May

25/03/2013

Armada Marine Hydraulics along with a strong Cornish Contingent will be exhibiting at the All energy Exhibition in May.

Armada Marine Hydraulics along with a strong Cornish Contingent will be exhibiting at the All energy Exhibition in May.

Read full story
Jens van Zuren, owner of DVZ (right) at the DVZ stand with the MD of Eucaro.

Armada attend SMM Hamburg Sept 4th-7th 2012

11/09/2012

Armada support DVZ at SMM Hamburg and announced their first equipment order for a superyacht in refit.

Armada support DVZ at SMM Hamburg and announced their first equipment order for a superyacht in refit.

Read full story
96m Superyacht VAVA II

Armada's Hydraulics power UK's largest ever built Superyacht

31/08/2012

Armada Marine design and install an integrated hydraulic ringmain and other innovative PLC controlled systems.

Armada Marine design and install an integrated hydraulic ringmain and other innovative PLC controlled systems.

Read full story
Seaworks 2012 -  500 stands & 60 Boats

Europafilter Wins Award at Seaworks.

18/06/2012

Europafilter and Armada for cleaner oil.

The Europafilter was a category winner at this years 'Spirit of Innovation' showcase at Seaworks. This is a hotly contested trophy for Seawork exhibitors who, in the past 12 months, have introduced and promoted products, vessels, services or projects to their key commercial audience. The Europafilter won the award in the "Marine Equipment, Electronics & Materials" section. The overall winner was the Odeo Flare which uses laser technology.

Read full story
Europafilter

Armada EUROPAFILTER in UK for cleaner oil

23/12/2011

Europafilter and Armada for cleaner oil.

Armada sales for EUROPAFILTER in UK are for cleaner oil and greener operation in the marine market.

Read full story
Training courses prepare you for control of even complex hydraulic systems

New hydraulics training course dates announced

02/12/2011

Training in all aspects of hydraulic systems

Our next three-day Hydraulics Training Course is scheduled for January 16th to 18th at our Hydraulics Training Facility in Falmouth.

Read full story
JA Harrison gaskets

Armada appointed JA Harrison gaskets distributor.

20/09/2011

JA Harrison has appointed Armada as their sole distrubutor for Cornwall & East Devon.

JA Harrison has chosen Armada as their disributor for Cornwall and East Devon. This is to support a growing market and Armada have been selected as the prefered distributors.

Read full story

Armada Hydraulic Training at International Institiute of Marine Surveying

15/08/2011

The International Institute of Marine Surveying recently held an Armada Hydraulic Training course.

The International Institute of Marine Surveying recently held an Armada Hydraulics Training Course in Introduction to Marine Hydraulics.

Read full story
DVZ

DVZ appoints Armada as DVZ Distributor & Service Agent.

14/07/2011

Armada Marine Hydraulics is delighted to become a DVZ Dealer.

DVZ the world leaders in the management of marine waste water and by-products have appointed Armada Marine as one of their global distributors.

Read full story

Armada installation at RNLI Fenit

23/06/2011

Fenit Lifeboat Station benefits from Armada D-Class system.

Armada installs new D-Class launching system at RNLI Fenit.

Read full story

Armada distributors for Teekay Couplings

16/06/2011

Teekay couplings appoints Armada Marine Hydraulics as a distributor

Armada Marine Hydraulics has been appointed as a distributor for the world renowned 'Teekay' pipe couplings.

Read full story

96m Superyacht swimming pool design goes from concept to production

31/05/2011

Armada new-build 96M Superyacht design goes ahead for swimming pool

Cutting edge design on 96M Superyacht is accepted and installation starts for Armada

Read full story

RNLI Burnham & Brighton contracts completed by Armada

13/05/2011

Armada has recently completed 2 more projects for the RNLI Shore Works Dept.

Another successful project sees two new floating boathouses for Burnham-on Crouch and Brighton.

Read full story
Matrix Watermakers

Armada Fluid Management with Matrix USA

10/05/2011

Armada expands into fluid management with Matrix & Aquachem USA

Armada has recently been appointed as a European Dealer for Matrix Watermakers.

Read full story

Safeguard your hydraulics with Armada

28/10/2010

Our Total Hydraulic Management Service puts your system in expert hands

We have created a total hydraulic management service designed to be a complete solution to hydraulic system management - we call it THMS.

Read full story

Get the best from your hydraulics with Armada's training programmes

10/09/2010

Hydraulic training at all levels for superyacht or commercial marine crews

The right training can ensure your hydraulic systems continue to function at their best. Find out how our experienced hydraulic trainers can help you take ownership of your vessel's hydraulic systems.

Read full story

Armada sails ahead with a £200,000 investment

17/12/2009

Armada Marine Hydraulics has undergone a £200,000 expansion, backed by revenue generated throughout the recession

The company has evolved to design, engineer and install hydraulics systems for ship equipment...

Read full story

Armada provides Total Hydraulic Management Service to shipowners worldwide

26/11/2009

Investment in innovative new services has allowed Armada Marine Hydraulics shrug off the effects of the credit crunch and show continued growth

The introduction of the new Total Hydraulic Management Service (THMS) has seen Armada working with some of the biggest names in shipmanagement...

Read full story

Armada Marine Hydraulics continues expansion

01/11/2009

Armada Marine Hydraulics continues to develop with sales growth and a continued investment in the business including four new additions to the team

Four new faces as Armada Marine Hydraulics continues expansion

Read full story
Website design and hosting by Eight Wire